Safety Block, Cross Section Drawing; Remove The Detergent Injector And The Pressure Holding Valve - Kärcher HDS 5/11 U Service Manual

5.11.11Safety block, cross section drawing

1 Locking screw, lack of water fuse
2 Spring
3 Adjustment screw, safety valve
4 Spring, safety valve
5 Valve disks
6 Outlet bore, high pressure (not visible here)
7 Spring plate
8 High pressure inlet from pump head
9 Solenoid piston, lack of water fuse
5.11.12Remove the detergent injector and the
pressure holding valve
The detergent injector is screwed into the pump head
with a thread.
 Unscrew the detergent injector.
 Remove the pressure holding valve.
1 Pump head
2 Detergent injector
English 5.906-487.0 Rev. 00 (04/10)
35