Delete A Personalized Ogm (Set Ogm To Default); Set The Answer Delay - Geemarc combi dect 295 User Manual

9.5.5

Delete a Personalized OGM (SET OGM to DEFAULT)

Using a handset:
1. Repeat Steps 1 to 6 in the section of Playback the Outgoing Message (OGM).
2. Press CANCEL/MUTE
previous menu and the pre-set OGM is restored automatically.
NOTE:
If pre-set OGM is playing, you are not allowed to delete the pre-set OGM.
Using the base:
1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
4. Press MENU/OK and
5. Press MENU/OK and
6. Press MENU/OK and enter the 4-digit system PIN (default PIN is 0000).
7. Press MENU/OK to confirm.
9.5.6

Set the Answer Delay

You can set the number of rings before the answering machine answers and starts
playing your OGM. You can set the answering machine to answer after two to eight
rings or TIME SAVER.
The TIME SAVER function answers calls after 6 ring signals, until the first new
message has been registered - then the answering machine switches to answering
after approximately 2 signals. This is useful when using remote access; if you call up
the answering machine and there is no reply after four rings that means there are no
messages recorded and you can hang up before you are charged for the call.
Using a handset:
1. Press MENU/OK
2. Press and
3. Press and
RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME SAVER).
4. Press and
5. Press to confirm.
Using the base:
1. Press MENU/OK and
2. Press MENU/OK and
3. Press MENU/OK and
4. Scroll MENU/OK and
5. Press MENU/OK to confirm.
to delete your personalized OGM and return to
/ to select ANS. MACHINE.
/ to select TAM SETTINGS.
/ to select OGM SETTING.
/ to select ANS & REC or ANSWER ONLY.
/ to select DEFAULT.
and / to select ANS. MACHINE.
/ to select TAM SETTINGS.
/ to select ANSWER DELAY (Available options: 2
/ to select your desired answer delay.
/ to select ANS. MACHINE.
/ to select TAM SETTINGS.
/ to select ANSWER DELAY.
/ to select the desired answer delay.
58