Delete The Entire Redial List; 4.12 Find The Handset - Geemarc combi dect 295 User Manual

4.11.4

Delete the Entire Redial List

Using a handset:
1. Follow Steps 1 and 2 in section 4.11.1.
2. Press and
3. Press to confirm.
4. Press to reconfirm.
Using the base:
1. Follow Steps 1 and 2 in section 4.11.1
2. Press MENU/OK and
3. Press MENU/OK to confirm.
4. Press MENU/OK to reconfirm.

4.12 Find the Handset

This feature helps you find the misplaced handset(s).
You can locate the handset by operation on the base station as below.
1. In idle mode, press MENU/OK and
2. Press MENU/OK to confirm. "PAGING" will flash on the base screen.
All the handsets registered to the base will produce the paging tone, and "PAGING" will
flash on the screen. You can stop the paging by pressing
CANCEL/MUTE on any handset or INT/MUTE/CLEAR on the base to stop paging.
NOTE:
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
/ to select DELETE ALL.
/ to select DELETE ALL?
/
26
to select PAGE ALL HS.
/ / /