Registration - Geemarc combi dect 295 User Manual

8.6

Registration

Your handset and base station is pre-registered. Up to five handsets can be
registered to a single base station.
If for some reason, the handset is not registered to the base station (
when the handset is near the base station), register your handset according to the
following procedure.
On the cordless handset:
1. Press MENU/OK
2. If you have more than one base, press
number from BASE 1, BASE 2, BASE 3 and BASE 4. There will be a
behind the current registered base number.
to display "PIN?", enter the 4-digit system PIN for the base
3. Press
(default PIN is 0000).
and the display will show "WAITING".
4. Press
5. At the same time, press MENU/OK and /
select REGISTRATION.
6. Press MENU/OK to see "PLEASE WAIT" flashing on the base display. After a
short delay, if the registration is successful, there will be a confirmation beep,
and the handset display will go back to idle mode with the new handset number
shown. The base display will also go back to idle mode.
7. Press INT/MUTE/CLEAR at any time to cancel.
and / to select REGISTRATION.
49
and / to select the base
on the base to
flashes even