Table of Contents
Advertisement
5 Answering Machine
(Model-dependent)
(model dependent)
Help 3 · Answering Machine
Press i and 3 to print an overview of the answer-
ing machine functions.
Only Fax Reception
In the fax only reception mode ( F on the display) the
answering machine of the device is switched off. You
cannot switch on the answering machine in this
mode (also see chapter Setting the Fax Switch, page
24) (this function is not supported in all countries
and networks).
Switching On and Off
Switching On/Off on the Device
Anonymous Outgoing Message
If you do not record a personal announcement, the
answering machine uses the anonymous announce-
ment set by the factory.
Press b three times to turn the answering machine on or
off. If the answering machine is turned on, the symbol —
appears on the display.
Activation
You can also call the function by pressing OK,
71 and OK.
Editing the Outgoing Message
Recording an Outgoing Message
During playback, press C and OK in order to delete
the currently playing outgoing message. Using [,
set the volume. Stop the playback with STOP.
Recording the Outgoing Message
1 Press b.
2 Use [ to select OUTGOING MSG. .
3 Confirm using OK.
You can also call the function by pressing OK,
75 and OK.
4 Dial using [ MESSAGE: RECORD .
5 Confirm using OK.
6 Press OK to record an outgoing message. Wait for the
confirmation tone before you say your text.
The outgoing message must be longer than ten
seconds and shorter than twenty seconds.
7 Press OK to end the recording. The recording is played
back.
Recording the Outgoing Message
If the volume of the outgoing message is too low,
rerecord the same. For recording, lift up the handset
of the device and speak the text into the microphone.
Listening to the Outgoing Message
1 Press b.
2 Use [ to select OUTGOING MSG. .
3 Confirm using OK.
You can also call the function by pressing OK,
75 and OK.
4 Using [ select MESSAGE: PLAY .
5 Confirm with OK. The outgoing message is played
back.
Answering Machine
Using the Anonymous Outgoing Message
Anonymous Outgoing Message
You can replace your personal outgoing message with the
factory default anonymous message.
1 Press b.
2 Use [ to select OUTGOING MSG. .
3 Confirm using OK.
You can also call the function by pressing OK,
75 and OK.
4 Using [ select MESSAGE: DEFAULT .
5 Confirm with OK. The outgoing message is played
back.
Using the Outgoing Message Without Re-
cording of Messages
Outgoing Message Without Recording of Messages
You can record an outgoing message which the caller hears
for which no message can be recorded in reply (= external
memo).
1 Press b.
2 Dial using [ EXTERN. MEMO .
3 Confirm using OK.
You can also call the function by pressing OK,
76 and OK.
4 Use [ to select whether you would like the outgoing mes-
sage to be switched on/off without recording the message.
5 Confirm using OK.
When you record an outgoing message, you are
asked, if you would like to use the old outgoing
message or would like to record a new one. Con-
firm using OK.
6 Recording a new outgoing message: Press OK
to record the outgoing message. Wait for the confirma-
tion tone before you say your text.
The outgoing message must be longer than ten
seconds.
7 Press OK to end the recording. The recording is played back.
Recording the Outgoing Message
If the volume of the outgoing message is too low,
rerecord the same. For recording, lift up the handset
of the device and speak the text into the microphone.
Listening to Messages
Listening to Messages
Press # to play the next message. With the number
keys, you can load the desired message directly. Dur-
ing playback, press C and OK in order to delete the
currently playing outgoing message. Using [, set
the volume. Stop the playback with STOP.
Listening to New Messages
Indication of New Messages
If new messages have been received on the answering ma-
chine, the ä button blinks. The number of the new
messages is shown on the display.
1 Press ä.
2 Confirm with OK.
3 The new messages are played back.
EN
13
Advertisement
Table of Contents
