Answering Machine; Switching On And Off; Editing The Outgoing Message - Philips MAGIC 5 eco User Manual

5 Answering Machine

Help 3 · Answering Machine
Notice
Printing Answering Machine Functions
Press i and 3 to print an overview of the
answering machine functions.

Switching On and Off

Anonymous Outgoing Message Switching On/Off on the Device
Notice
Using Anonymous Outgoing Messages
If you do not record a personal announcement,
the answering machine uses the anonymous
announcement set by the factory.
Press b three times to turn the answering machine on or
off. If the answering machine is turned on, the symbol —
appears on the display.
Activation
Notice
Access Function
You can also call the function by pressing OK,
71 and OK.

Editing the Outgoing Message

Recording the Outgoing Message
Notice
Recording the Outgoing Message
During playback, press C and OK in order to
delete the currently playing outgoing message.
Using [, set the volume. Stop the playback
with STOP.
Recording the Outgoing Message
1 Press b.
2 Using [ select OUTGOING MSG. .
3 Confirm with OK.
Notice
Access Function
You can also call the function by pressing
OK, 75 and OK.
4 Using [ select MESSAGE: RECORD .
5 Confirm with OK.
6 Press OK to record an outgoing message. Wait for the
confirmation tone before you say your text.
Notice
Length of Outgoing Message
The outgoing message must be longer than
ten seconds and shorter than twenty seconds.
7 Press OK to end the recording. The recording is played
back.
Answering Machine · Switching On and Off
Recording the Outgoing Message
Notice
Recording the Outgoing Message
If the volume of the outgoing message is too low,
rerecord the same. For recording, lift up the tel-
ephone handset of the device and speak the text
into the microphone.
Playing Back the Outgoing Message
1 Press b.
2 Using [ select OUTGOING MSG. .
3 Confirm with OK.
Notice
Access Function
You can also call the function by pressing
OK, 75 and OK.
4 Using [ select MESSAGE: PLAY .
5 Confirm with OK. The outgoing message is played
back.
Using Anonymous Outgoing Mes-
sages
Anonymous Outgoing Message
You can replace your personal outgoing message with the
factory default anonymous message.
1 Press b.
2 Using [ select OUTGOING MSG. .
3 Confirm with OK.
Notice
Access Function
You can also call the function by pressing
OK, 75 and OK.
4 Using [ select MESSAGE: DEFAULT .
5 Confirm with OK. The outgoing message is played
back.
Using Announcement without
Recording Message
Outgoing Message Without Recording of Messages
You can record an outgoing message which the caller hears
for which no message can be recorded in reply (= external
memo).
1 Press b.
2 Using [ select EXTERN. MEMO .
3 Confirm with OK.
Notice
Access Function
You can also call the function by pressing
OK, 76 and OK.
EN
15