Installing And Configuring The Control Card; Ntp-L41 Installing And Configuring The Tnc, Tnce, Tsc, Tsce, Tncs, Or Tncs-O Card - Cisco NCS 2006 Hardware Installation Manual

Installing and Configuring the Control Card

This chapters describes the procedures for installing and configuring control cards.
The sections are:
•
•
NTP-L41 Installing and Configuring the TNC, TNCE, TSC, TSCE,
TNCS, or TNCS-O Card
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
NTP-L41 Installing and Configuring the TNC, TNCE, TSC, TSCE, TNCS, or TNCS-O Card, page 399
Filler and Blank Cards, page 406
26
C H A P T E R
This procedure describes how to install and configure
the TNC, TNCE, TSC, TSCE, TNCS, or TNCS-O
card.
Redundant TNC/TNCE/TSC/TSCE/TNCS/TNCS-O
cards on Cisco NCS 2006 shelf (required)
Stand-alone TNC/TNCE/TSC/TSCE card on Cisco
NCS 2002 shelf (required)
Redundant TNCS/TNCS-O cards on the Cisco NCS
2015 shelf (required)
None
Required
Onsite
Provisioning or higher
Cisco NCS 2000 Series Hardware Installation Guide
399