Dlp-L23 Removing The Fiber Module - Cisco NCS 2006 Hardware Installation Manual

Connecting and Routing the Cables
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Procedure
Step 1 Complete
Step 2
Complete
Step 3 Complete
Stop. You have completed this procedure.

DLP-L23 Removing the Fiber Module

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
DLP-L23 Removing the Fiber Module, on page
DLP-L24 Installing the Cable Module, on page
DLP-L25 Routing and Locking Cables, on page
DLP-L23 Removing the Fiber Module
#1 Phillips cross-head PH screwdriver
None
As needed
Onsite
None
223.
224.
225.
This procedure removes the default fiber module in
the NCS 2006 system.
#1 Phillips cross-head PH screwdriver
None
As needed
Onsite
None
Cisco NCS 2000 Series Hardware Installation Guide
223