Installing A Rear Mezzanine Card - Cisco o UCS X440p Installation And Service Manual

Installing a Rear Mezzanine Card

Step 5 Remove an existing rear mezzanine card.
a) Using a #2 Phillips screwdriver, loosen the captive thumbscrews that secure the card to its threaded standoffs.
b) Lift the card off of the PCIe node.
You might need to gently rock the card while lifting it to disengage it from the socket.
Installing a Rear Mezzanine Card
Use this task to install a rear mezzanine card onto the PCIe node.
Cisco UCS X440p PCIe Node Installation and Service Guide
40
Servicing the Cisco UCS X440p PCIe Node