Samson Series 3730 Mounting And Operating Instructions page 28

Attachment to the control valve – Mounting parts and accessories
1 Lever
1.1 Nut
1.2 Disk spring
2 Follower pin
3 Follower plate
3.1 Follower plate
6 Connecting plate
6.1 Seals
7 Pressure gauge bracket
8 Pressure gauge
mounting kit
9 Stem connector
9.1 Bracket
10 NAMUR bracket
11 Screw
14 Bolt
14.1 Screw
15 U-bolt
16 Bracket
28
Additional bracket for
actuators with 2800 cm²
and travel ≥ 60 mm
XL and L lever
NOTICE
Only use the connecting plate (6) included in the
accessories to connect supply and output!
Never screw threaded parts directly into housing!
Attachment to rod-type yoke
Rods with 20 to 35 mm diameter
Attachment to NAMUR rib
EB 8384-6 EN