5.
Repeat the above to create an object called server2 for the 192.168.1.11 IP address
B. Create an IP4Group which contains the 2 web server addresses:
1.
Go to: Objects > Address Book > Add > IP4 Group
2.
Enter a suitable name, for example server_group
3.
Add server1 and server2 to the group
4.
Click OK
C. Specify the SLB_SAT IP rule:
1.
Go to: Policies > Firewalling > Main IP Rules > Add > IP Rule
2.
Now enter:
•
Name: web_slb
•
Action: SLB_SAT
•
Service: HTTP
•
Source Interface: wan
•
Source Network: all-nets
•
Destination Interface: core
•
Destination Network: wan_ip
3.
Select SAT SLB
4.
Under Server Addresses add server_group to Selected
5.
Click OK
D. Specify a NAT rule for internal clients access to the servers:
1.
Go to: Policies > Firewalling > Main IP Rules > Add > IP Rule
2.
Now enter:
•
Name: web_slb_nat
•
Action: NAT
•
Service: http-all
•
Source Interface: lan
•
Source Network: lan_net
•
Destination Interface: core
•
Destination Network: wan_ip
3.
Click OK
815
Chapter 10: Traffic Management