Table of Contents
Advertisement
•
IP Range: nat_pool_range
3.
Select the Proxy ARP tab and add the WAN interface
4.
Click OK
C. Finally, define the NAT rule in the IP rule set:
1.
Go to: Policies > Firewalling > Main IP Rules > Add > IP Rule
2.
Under General enter:
•
Name: Enter a suitable name such as nat_pool_rule
•
Action: NAT
3.
Under Address filter enter:
•
Source Interface: lan
•
Source Network: lan-net
•
Destination Interface: wan
•
Destination Network: all-nets
•
Service: http-all
4.
Select the NAT tab and enter:
•
Check the Use NAT Pool option
•
Select my_stateful_natpool from the drop-down list
5.
Click OK
587
Chapter 7: Address Translation
- Quick Links:
- User Manual
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
