Assembly - Ironman Fitness 6100.4-061716 Owner's Manual

1. Stabilizers Installation
A. Front Stabilizer: Position the Front Stabilizer (5) in front of the Main Frame (1). Align the
bolt holes and attach the Front Stabilizer (5) onto the front curve of the Main Frame (1) with
two Carriage Bolts (15), two Big Curved Washers (16), two Spring Washers (21), and two
Cap Nuts (17) and tighten with the Multi Hex Tool with Phillips Screwdriver (32) provided.
B. Rear Stabilizer: Position the Rear Stabilizer (6) behind the Main Frame (1). Align the bolt
holes and attach the Rear Stabilizer (6) onto the rear curve of the Main Frame (1) with two
Carriage Bolts (15), two Big Curved Washers (16), two Spring Washers (21), and two Cap
Nuts (17) and Tighten with the Multi Hex Tool with Phillips Screwdriver (32) provided.
Hardware:
(15) Carriage Bolt
4PCS
ASSEMBLY
(16) Big Curved Washer
4PCS
Multi Hex Tool with Phillips
Screwdriver
S10, S13, S14, S15
(17) Cap Nut
4PCS
8
1PC
(21) Spring Washer
4PCS