Assembly - Ironman Fitness H-Class 520 Owner's Manual

ASSEMBLY
Step 1
Place a block of styrofoam underneath the Main Frame (1) for easier installation.
Attach the Front Stabilizer (2) to the Main Frame by aligning the bolt holes and installing
two Carriage Bolts (36), two Washers (37) and two Cap Nuts (35) as shown below.
Tighten the Cap Nuts (35) with the 14,17mm Open End Wrench Provided.
Install the Rear Stabilizer (3) to the Main Frame (1) using the same method as above.
Tool:
14, 17mm Open End Wrench
1PC
Hardware:
(36) Carriage Bolt
(35) Cap Nut M10
(37) Washer
M10x55
4PCS
10x19x1.5T
4 PCS
4 PCS
10