Assembly - Ironman Fitness Viper 315-00109 Owner's Manual

Assembly

Getting Started - The Ironman Fitness Viper Recumbent Bike will require some assembly.
Unpack the box in a clear area. Remove packing material. Do not dispose of packing material
until assembly is complete and unit is working properly. Place the unit on a clean level surface
for assembly. Make sure there is easy access to an electrical outlet. Before assembling, the
unit should be placed as close as possible to its final location. If you are missing any parts,
please call Ironman Fitness at 1-800-750-4766. Tools have been provided to assist with prod-
uct assembly.
Figure 1
N8
Figure 1
Step 1:
Secure front stabilizer bar (B) to main
frame (A1) using two bolts (N1), spring
washers (N2) and two washers (N3).
Note: Bolts will already be installed onto
the front stabilizer.
N2
N3
Figure 2
Figure 2
Step 1:
Secure rear stabilizer (C) to the main
frame (A2) using bolts (N4), two spring
washers (N2) and two washers (N3),
already attached to stabilizer.
7