Assembly - Ironman Fitness 6152 Owner's Manual

E-9
1.Front and Rear Stabilizer Installation
1.1 Front Stabilizer Installation.
Lift up the main frame (D-1) from the front, and then align the Front Stabilizer (E-1) onto the
front curve of the Main Frame (D-1). Insert 2 Square Neck Screws (N-1) from the bottom,
followed by 2 Flat Washers (N-4), 2 Spring Washers (N-3) and 2 Cap Nuts (N-2). Hold the
Front Stabilizer (E-1) to the Main Frame (D-1) then tighten by using the open wrench 13, 15mm
(N-13) provided.
1.2 Rear Stabilizer Installation.
Repeat the above step to install the REAR stabilizer (F-1).
1.3 Adjustable Levelers
Turn the Adjustable Levelers (E-9) to the desired height and make sure the bike is stable on the
floor after the adjustment. Proper leveling will reduce wobbling and squeaking.
Hardware:
N-1 Carriage Bolt
M8x1.25x60L
4PCS
ASSEMBLY
N-2 Cap Nut
M8x1.25x15L
4PCS
10
Tool:
N-13 Open Wrench
13,15mm 1PC
D-1
E-9
N-3 Spring washer
D13.2xD8.2x2T
4PCS
N-4 Flat washer
D16xD8.5x1.2T
4PCS