F-Csf Cable/Csf Connector Pca Replacement - Fujitsu DL7600 Maintenance Manual

(23) F-CSF Cable/CSF Connector PCA replacement

Removal
1. Remove the upper cover.
2. Remove the printer mechanism assembly.
3. Remove the FAN UNIT 2.
4. Disconnect the cable from the front CSF PCA connector.
5. Remove the two screws securing the front CSF PCA to remove the PCA.
Installation
1. Install the front CSF PCA by reversing the removal procedure.
Screw
Front CSF PCA
Cable
Figure 4.43 F-CSF Cable/Connector PCA replacement
Bending the front CSF cable (KA02027-Y192)
Figure 4.44 bending size of Front csf cable
75