(34) HCPP Motor replacement
Removal
1. Remove the upper cover.
2. Remove the printer mechanism assembly.
3. Remove the E ring securing the HCPP gear , and remove the HCPP gear.
4. Remove the two screws securing the HCPP motor.
5. Disconnect cable from the sensor PCA connector, then remove the HCPP motor from the side frame.
Installation
1. Install the HCPP motor assembly by reversing the removal procedure.
HCPP Motor
HCPP Gear
Screws
E-ring
Figure 4.57 HCPP Motor replacement
87