4. Attach the green ribbon guide on the print head.
Please make sure that the ribbon slack lightly. (If the ribbon is strained, it will quirk when installation.)Push
the green ribbon guide until the triangle mark " "meets the round projection of print head.
5. Turn the ribbon feed knob clockwise to take up any slack in the ribbon.
6. Return the control panel..
7. Close the front cover of the printer.
NOTE
A Fujitsu ribbon cassette is recommended. Don't use other cassettes. If ot h er cassettes are used, operating
problems or a damage of the print head may be caused.
Print Head
Ribbon Guide
Figure 4.20 Ribbon cassette installation
Knob
Figure 4.21 Ribbon cassette installation
56
Triangle
Projections