(22) F-CSF Cable/CSF Connector PCA replacement
Removal
1. Remove the upper cover.
2. Remove the printer mechanism assembly.
3. Remove the FAN UNIT 2.
4. Disconnect the cable from the front CSF PCA connector.
5. Remove the two screws securing the front CSF PCA to remove the PCA.
Installation
1. Install the front CSF PCA by reversing the removal procedure.
Screw
Front CSF PCA
Cable
Figure 4.36 bending size of control panel cable
Bending the front CSF cable (KA02027-Y192)
Figure 4.37 bending size of Front csf cable
64