USING THE STATION
1
RECEIVING CALLS
1-1
Answering a call
1
When a call is received from an entrance station or security guard
station, a call tone will sound and the status indicator flashes. If
the station has a camera, video will be displayed on the monitor.
GT-1C7-L/GT-1C7
Lights up.
Flashes.
2
Press the [
] button once, and after the beep, communicate
hands-free. Hands-free communication starts when the status
indicator switches from flashing to steadily lit.
[
]
• If you press the
button for at least two seconds while talking
hands-free, a beep will be emitted and you can communicate by
push-to-talk communication.
• In push-to-talk communication, press the
release it to listen.
• Calling turns off after a set amount of time if there is no answer.
• Listening is possible with hearing aids with T-mode. (GT-1C7-L and
GT-1M3-L only)
GT-1C7-L/GT-1C7
Lights up.
Lights up.
1-2
Calling from the Doorbell Button
1
When the doorbell button is pressed, a call tone
will sound.
• A different call tone sounds. (Communication is not
possible.)
3
GT-1M3-L/GT-1M3
[
]
button to talk and
GT-1M3-L/GT-1M3
GT-1C7-L/GT-1C7
- 6 -
When done talking, press the [
All the indicators turn off.
GT-1C7-L/GT-1C7
NOTES: • During communication, it is not possible to switch back to
hands-free from push-to-talk communication.
• The communication will end automatically after approximately
60 seconds.
• If the call tone volume is turned off, the status indicator will
flash with a long interval.
The station emits an electromagnetic field. If a hearing aid with
T-mode is brought too close to the station, this may cause ear
pain. (
GT-1C7-L and GT-1M3-L only
GT-1M3-L/GT-1M3
] button.
GT-1M3-L/GT-1M3
)