Specifications - Panasonic SA-MAX5000PN Service Manual

4 Specifications

 Amplifier section
RMS output power stereo mode
High Ch
350 W per channel (3 ), 1 kHz, 30% THD
Mid Ch
350 W per channel (3 ), 1 kHz, 30% THD
Low Ch
500 W per channel (2 ), 100 Hz, 30% THD
Total RMS stereo mode power
 Disc section
Disc played (8 cm or 12 cm)
*MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up
Wavelength
®
 Buetooth
section
Version
Class
Supported profiles
Operating frequency
Operation distance
 Internal memory section
Memory
Memory size
Media file format support
Memory recording
Bit rate
Memory recording speed
Recording file format
 Tuner section
Frequency modulation (FM)
Preset memory
Frequency range
87.5 MHz to 108.0 MHz (100 kHz step) (For PN)
87.9 MHz to 107.9 MHz (200 kHz step) (For PN)
87.50 MHz to 108.00 MHz (50 kHz step) (For PS)
Antenna terminals
Amplitude modulation (AM)
Preset memory
Frequency range
520 kHz to 1710 kHz (10 kHz step) (For PN)
522 kHz to 1629 kHz (9 kHz step) (For PS)
520 kHz to 1630 kHz (10 kHz step) (For PS)
 Terminal section
USB port
USB standard
Media file format support
USB device file system
USB recording
Bit rate
USB recording speed
Recording file format
AUX IN 1
Audio input
AUX IN 2
Terminal
Microphone
Terminal
2400 W
CD, CD-R/RW (CD-DA, MP3*)
790 nm(CD)
®
Bluetooth 2.1 + EDR
Class 2
A2DP, AVRCP, SPP, OPP, FTP
2.4 GHz band FH-SS
10 m line of sight
4 GB
MP3 (*.mp3)
128 kbps
1x, 3x max (CD only)
MP3 (*.mp3)
30 stations
75  (unbalanced)
15 stations
USB 2.0 full speed
MP3 (*.mp3)
FAT12, FAT16, FAT32
128 kbps
1x, 3x (CD only)
MP3 (*.mp3)
Pin jack
Stereo, 3.5 mm jack
Mono, 6.3 mm jack
 General
Power supply
Power consumption
Dimensions (W x H x D)
Mass
Operating temperature range
Operating humidity range
Power consumption in standby
mode (approximate)
Power consumption in standby
mode (approximate)
(With "BLUETOOTH STANDBY"
set to "ON")
Note:
1. Specifications are subject to change without notice.
Mass and dimension are approximate.
2. Total harmonic distortion is measured by the digital spec-
trum analyzer.
 System: SC-MAX5000PN
 System: SC-MAX5000PS
10
AC 120 V, 60 Hz (for PN)
AC 220 V to 240 V, 50/60 Hz
(for PS)
155 W
460 mm x 234 mm x 409 mm
5.8 kg
0 C to +40 C
35% to 80% RH
(no condensation)
0.4 W
0.5 W
Main Unit: SA-MAX5000PN
Speaker System: SB-MAX5000PN
Main Unit: SA-MAX5000PS
Speaker System: SB-MAX5000PS