Handling Song Files
Basic Song File Operation
Song files can be handled via the instructions shown below.
1.
Connect the appropriate USB flash drive containing the
desired files to the USB [TO DEVICE] terminal.
2.
Select a Song for handling.
For information on selecting a Song, see page 41.
3.
Call up the File mode.
3-1.
Press the [FUNCTION] button repeatedly to call up the
"Song" menu display. Use the [
then press the [>] button.
"Song" menu display
3-2.
Select the desired operation from "Delete," "Copy," "Move,"
"MIDI to Audio" or "Rename."
For example: Renaming files
From here, if you wish to close the File mode, press the [EXIT] button
once or twice.
4.
Execute the selected operation.
For specific instructions, refer to the corresponding section.
Delete
•
....................................page 65
Copy
•
......................................page 65
Move
•
.....................................page 66
MIDI to Audio
•
Rename
•
................................page 68
During operation, messages (information, confirmation, etc.) may be
shown on the display. For explanations and details, refer to "Message List"
on page 106.
5.
Press the [EXIT] button to close the File mode.
64
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
]/[
u
...................page 67
] buttons to select "File"
d
NOTICE
Do not disconnect the USB
flash drive during file handling
or when a USB flash drive is
mounted. Doing so may delete
all data in the USB flash drive
and the instrument.