Clp-665Gp Assembly - Yamaha CLAVINOVA CLP- 685 Owner's Manual

CLP-665GP Assembly

Remove all parts from the package and make sure
you have all of the items.
Main unit
To prevent damage to the MIC-HPJ unit located at the bottom of main
unit, make sure to place main unit on the styrofoam pads. Also, make
sure that the pads do not touch the MIC-HPJ.
Legs
6 × 40 mm fixing screws × 12
6 × 20 mm fixing screws × 4
Power cord
Pedal box
Bundled pedal cord inside.
The pedals are covered with
vinyl covers when shipped from
the factory. Before starting the
assembly, please make sure to
remove the cover from the
damper pedal.
Cord holder
4 x 10 mm thin screws x 2
Headphone hanger
1.
Lean the unit against the wall as
shown below.
CAUTION
Be careful not to pinch your fingers.
Be sure to position the
keyboard side on the bottom.
1-1.
Spread a large soft cloth, such as a blanket,
as shown to protect the floor and wall
surfaces.
1-2.
Lean the main unit against the wall with
the key cover closed and the keyboard side
on the bottom.
NOTICE
Do not place the main unit as shown in the illustration here.
Incorrect
Incorrect
Incorrect
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
Assembling the Clavinova
121