Table of Contents
Advertisement
To call up the desired parameter:
Press the [FUNCTION] button several times to select "System" menu, then use the [
parameter.
[>]
[>]
[<]
[<]
MIDI
MIDI OUT
(Setting display) Determines the MIDI channel on which the MIDI
MIDI IN
(Setting display) Determines which part of the instrument will be
Local Control
Receive Param. (Setting display) Determines which types of MIDI messages can be
Transmit Param. (Setting display) Determines which types of MIDI messages can be
Initial Setup
Cancel
Execute
Backup
Backup Setting
Backup
Restore
Factory Set
[>]
Description
[<]
messages generated via the keyboard performance will
be transmitted from the MIDI [OUT] or USB [TO HOST]
terminal. When Dual/Split/Duo is on, the MIDI channels
are assigned as follows.
• Performance via the R1 Voice = n (setting value)
• Performance via the R2 Voice = n+2
• Performance via the L Voice = n+1
controlled by each channel data of the MIDI messages
coming from the MIDI [IN] and USB [TO HOST] terminal.
• Song: Song part is controlled by the MIDI messages.
• Keyboard: The entire keyboard is controlled
regardless of the Dual/Split/Duo setting.
• R1: The keyboard performance via the R1 Voice is
controlled.
• L: The keyboard performance via the L Voice is
controlled.
• R2: The keyboard performance via the R2 Voice is
controlled.
• Off: No part is controlled.
–
"Local Control On" is a state in which this instrument
produces the sound from its tone generator when you
play the keyboard. In "Local Control Off" state, the
keyboard and the tone generator are cut off from each
other. This means that even if you play the keyboard,
this instrument will produce no sound. Instead, the
keyboard data can be transmitted via MIDI to a
connected MIDI device or computer, which can
produce the sound. The "Local Control Off" setting is
useful when you wish to play only an external sound
source while playing the keys on this instrument.
received or recognized by this instrument.
MIDI message types:
Note on/off, Control Change, Program Change, Pitch
Bend, System Exclusive
transmitted from this instrument.
MIDI message types:
Note on/off, Control Change, Program Change, Pitch
Bend, SystemRealTime, System Exclusive
Transmits the current panel settings such as Voice
selection to a connected MIDI device or computer.
Before you start recording your performance to a
connected MIDI device or computer, execute this
operation to record the current panel settings at the
beginning of your performance data. It causes that the
same panel settings are called up when the recorded
performance is played back.
Operation:
Move the highlight to "Execute," then press the [>]
button to transmit the panel settings as MIDI messages.
–
For instructions about these functions, refer to pages 98
– 99.
–
–
–
]/[
]/[<]/[>] buttons to select the desired
u
d
Default setting
Ch1
"Song" for each of
all MIDI channels
On
On (for all the
MIDI messages)
On (for all the
messages)
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
System Menu
Setting range
Ch1 – Ch16, Off
(not transmitted)
For each MIDI
channel:
• Song
• Keyboard
• R1
• L
• R2
• Off
On, Off
On, Off (for each
MIDI message)
On, Off (for each
message)
–
–
–
–
95
Advertisement
Table of Contents
