Yamaha CLAVINOVA CLP- 685 Owner's Manual page 46

Playing Back Songs
3.
In the Repeat display, select a desired item using the [
[ ] buttons, then press the [>] button.
d
If you want to set AB Repeat, select "A – B. "
If you want to set Song Repeat, select "Song. "
4.
Set in the appropriate setting display.
• AB Repeat .................See below.
• Song Repeat ...............See page 47.
AB Repeat setting
MIDI Audio
Specify the repeat range.
4-
Press the [
1.
playback.
4-
Press the [>] button at the starting point (A) of the range
2.
to be repeated.
A – B display
4-
Press the [>] button again at the ending point (B).
3.
After an automatic lead-in (to help guide you into the phrase), the
range from Point A to Point B is played back repeatedly.
5.
To turn off the Repeat function, press the [>] button
while "Repeat Off " is highlighted, or select another Song.
46
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
/ ] (Play/Pause) button to start Song
R K
]/
u
Specifying the top of a
Song as Point A
Specify Point A before starting
playback, then start playback
and specify Point B.
Specifying the end of a
Song as Point B
Specifying only Point A results
in repeat playback between
Point A and the Song end (as
Point B).
NOTE
You can also specify the repeat
range by the following
procedure.
Highlight the measure
1
number using the [
then fast-forward the Song to
Point A using the [<]/[>]
buttons.
Highlight "Set A" using the
2
[ ] button, then press the [>]
d
button.
After specifying Point A, the
display for specifying Point
B is called up.
Specify Point B in the same
3
way as Point A.
] button,
u