Assembling the Clavinova
CLP-645, CLP-635 Assembly
Remove all parts from the package and make sure
you have all of the items.
Foamed styrol pads
Remove foamed styrol pads from the package, position them on
the floor, then place A on top of them. Position the pads so that
they will not hide the connectors on the bottom of A.
Bundled pedal cord inside
6 × 20 mm thick screws × 10
4 × 12 mm thin screws × 2
4 × 20 mm tapping screws × 4
CLP-645
Power cord
118
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
Cord holders × 2
4 × 10 mm thin screws × 2
Headphone hanger
CLP-635
AC adaptor
Power cord
1.
Attach C to D and E.
E E
1-2
C C
1-1
1-1.
Untie and straighten out the bundled pedal
cord. Do not discard the vinyl tie. You will
need it later in step 5.
1-2.
Insert the protrusions into the holes on the
brackets, then attach D and E to C by
tightening the four thick screws (6 × 20 mm).
2.
Attach B.
Depending on the model of digital piano you
purchased, the surface color of one side of B may
be different from the other side. If so, position B
so that the side similar in color to D and E faces
the player.
E
2-2
1-2
D D
1-2
2-1, 2-3
B
D