Basic Song File Operation - Yamaha CLP- 585 Owner's Manual

Handling Song Files

Basic Song File Operation

Song files can be handled via the instructions shown below.
1.
Connect the USB flash memory to the USB [TO DEVICE]
terminal as necessary.
In order to use a file on a USB flash memory with the instrument, the file
must be stored to the USB flash memory.
2.
Select a Song for handling.
For information on selecting a Song, see page 39.
3.
Call up the File mode.
3-1.
Press the [MENU] button repeatedly to call up the Song Menu
display. Use the [ ]/[ ] buttons to select "File" then press the
[>] button.
Song Menu display
3-2.
Select the desired operation from "Delete," "Copy," "Move,"
"MIDItoAudio" or "Rename."
For example: Renaming files
From here, if you wish to close the File mode, press the [EXIT] button
once or twice.
4.
Execute the selected operation.
For specific instructions, refer to the corresponding section.
• Delete ....................................page 63
• Copy ......................................page 63
• Move .....................................page 64
• MIDItoAudio
• Rename ................................page 66
During operation, messages (information, confirmation, etc.) may be
shown on the display. For explanations and details, refer to "Message List"
on page 102.
5.
Press the [EXIT] button to close the File mode.
62
CLP-585/575/545/535/565GP Owner's Manual
.....................page 65
NOTICE
Do not disconnect the USB
flash memory during file
handling or when a USB flash
memory is mounted. Doing so
may delete all data in the USB
flash memory and the
instrument.