5.
Connect the pedal cord and power
cord.
5-1
5-1
5-4
5-1.
Insert the plug of the pedal cord into the
pedal connector.
Insert the pedal cord securely
until the metal part of the
cord plug disappears from
view. Otherwise, the pedal
may not function properly.
5-2.
Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
5-3.
Use a vinyl tie to take up any slack in the
pedal cord.
5-4.
Insert the plug of the power cord into the
[AC IN] connector.
6.
Set the adjuster.
Rotate the adjuster until it comes in firm contact
with the floor surface.
7.
5-3
5-2
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
Attach the headphone hanger.
Use the two thin screws (4 × 10 mm) to attach the
hanger as shown in the illustration.
Assembling the Clavinova
117