Table of Contents
Advertisement
LAN Unit
You can connect to a LAN (Local Area Network) with the 100 Base-TX/10 Base-T
LAN units on your computer. To activate the LAN unit, perform the following steps.
Never insert any cables, but a LAN cable, which have different electric
characteristics from those of the LAN cables. Otherwise, the LAN unit
and the cables may be damaged.
Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 only when connecting to 100 BASE-TX
LAN.
Connecting Your Computer To LAN
1.
Turn off your computer.
2.
Open the cover on the rear side of your computer.
To avoid damaging the LAN unit, close the cover when nothing is
6
connected to the modem and LAN jacks.
3.
Connect one end of the LAN cable to the LAN jack and the other to the network
hub.
LAN Jack
6-4
Cover
LAN Cable
To Network Hub
Advertisement
Table of Contents
