Table of Contents
Advertisement
Adjusting Display
You can adjust the brightness, resolution, and number of colors of the internal LCD
display for more comfortable viewing.
Changing Brightness of Display
Press and hold Fn key and then, press F6 (
internal LCD display.
Press and hold Fn key and then, press F7 (
internal LCD display.
2
Changing Resolution and Number of Colors
When shipped, your computer is set to the default resolution and color. The default
resolution is 1024 x 768 at 64K colors. To change the resolution and the number of
colors, follow the instructions below:
1.
In the Display Properties dialog box, select Settings tab.
2.
Select the number of the colors in the Color quality, and select the resolution in
the Screen resolution. Refer to the table below.
3.
Click OK; then, Yes.
Available Resolutions and Colors
Resolution
800 x 600
1024 x 768
1280 x 1024
1400 x 1050
1600 x 1200
*1
Can be chosen for an external monitor only when it is capable of the listed resolution
(
)
modes. Cannot be set when displaying on the LCD monitor only and on the LCD
and the external monitor simultaneously.
*2
On the internal LCD screen, the number of colors in this mode is made using
(
)
a Dithering algorithm.
• When you use the tablet pen at an 800 x 600 resolution, follow these
2-8
Number of Colors
64K, 16M
64K, 16M
(*1)
64K, 16M
(*1)
64K, 16M
(*1)
64K, 16M
instructions to set the full screen mode. Otherwise, the cursor on the screen
will mismatch the tip of the pen.
1.
In the Settings tab of the Display Properties dialog box, click
) key to decrease the brightness of the
) key to increase the brightness of the
(*2)
(*2)
Advertisement
Table of Contents
