Resetting System - Sharp PC-TN1 Series Operation Manual

Resetting System

You may need to restart the system if your computer becomes inoperable or after
adding new hardware or software. When the message appears after the installation,
click OK, Yes, etc. to restart Windows.
Resetting may cause data loss. Use the resetting process only if the
normal Windows Shut Down does not work because of software
malfunction. Although resetting will not damage the system, you may
lose the data you are processing.
Warm Boot (Software Reset)
If the system is locked up because of a software problem, you can reset or reboot the
system by pressing the Ctrl+Alt+Del keys simultaneously or the windows security
button ( ) on the right side of the display, and select Applications tab of Windows
Task Manager dialog box. Click the name of the program hanging up, then, End Task.
If this does not work, select the current log-in user in Users tab and click Disconnect or
Logoff, then, Yes.
Power Switch
You can turn off your computer with the power switch if you encounter hardware or
software problems that lock up the system. In this case, slide and hold the switch for
more than four seconds.
Reset Switch
If you cannot turn off your computer with the power switch, you can use the reset
switch on the bottom of your computer. To reset the system, insert a narrow object into
the small hole to press the switch.
Reset Switch
R E S E T
2
2-3