Lan Unit - Sharp PC-AL27 - Actius AL27 - Mobile Athlon 64 1.6 GHz Operation Manual

LAN Unit

You can connect to a LAN (Local Area Network) with a 100 Base-TX or 10 Base-T
LAN unit on the computer. To activate the LAN unit, perform the following steps.
Never insert any cables, but a LAN cable, which have different electric
characteristics from those of the LAN cable. Otherwise, the LAN unit and
the cables may be damaged.
Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 only when connecting to 100 BASE-TX
LAN.
Connecting Your Computer to LAN
1. Turn off the computer.
2. Connect the LAN cable to the LAN jack and the network hub.
Do not insert the modem cable into the LAN jack. It may damage the
modem cable and the LAN jack.
You can also directly communicate with another computer using a cross
LAN cable.
3. Turn on the computer.
LAN Jack
LAN Cable (Straight Cable)
4
To Network Hub
4-5