Table of Contents
Advertisement
LAN unit
You can connect to a LAN (Local Area Network) with the 100 Base-TX/10 Base-T
LAN units on your computer. To activate the LAN unit, perform the following steps.
Use a category 3 or a category 5 LAN cable when connecting to 10
BASE-T LAN, and the category 5 only when connecting to 100 BASE-TX
LAN.
Connect your computer to LAN
1.
Turn off the computer.
2.
If your computer is provided with the LAN cable, go to the step 4. If with the
core for a LAN cable, go to the next step.
3.
Attach the provided core to one end of your LAN cable. Insert the cable into the
core and close the core until it clicks.
4.
Open the cover for the LAN jack on the right side of your computer.
To avoid damaging the LAN unit, close the cover after you finish using
the LAN unit.
Cover
5
5-5
Advertisement
Table of Contents
