Table of Contents
Advertisement
SECTION 2: INSTALLING THE DVR1
PHILIPS
PHILIPS
CONSOLE
VCR
VCR
SVHS IN
MON B
MON A
1
2
KEYBD
IN
OUT
SVHS OUT
SDA
ALARM
Multiplexer
DVR1
Keyboard
Figure 2A provides an illustration of a typical DVR1 system installation. Consider the peripheral devices necessary for
your system application, and perform the system connections according to the following installation instructions.
2.1
Mounting
The DVR1 is supplied as a desktop unit. If desired, your unit may be rack mounted using the rack mount kit
(included with the unit). Ensure that the mounting/installation location provides adequate ventilation and protection
from moisture. Do not obstruct the ventilation holes at the sides of the unit.
2.2
Connecting the DVR1
Rear Panel Connections
1. Refer to Figure 2B for details on the input/output connections supplied by the DVR1.
1. Ethernet Port: For viewing Live or Recorded Images on a PC via the Ethernet (network).
2. Power Connector: Connect 12 Volt AC external power supply (provided).
Ensure that the site's AC Power is stable and within the rated voltage of the external power supply. If the site's
NOTE:
AC power is likely to have spikes or power dips, use power line conditioning or an Uninterruptible Power Supply (UPS).
3. Accessory I/O Port: Used to connect peripheral devices such as alarm devices, alarm relays, or the VEXT (Video External Pulse)
connection (see additional pertinent information, including pinout details, in this section).
4. SCSI Port: For connecting a SCSI compatible archive device.
5. RS-232 Serial Port: Serial port for Flash Upgrading of software. Also used for external control of unit.
NOTE: The RS-232 port does NOT work with a modem. Use a Null Modem type cable (Philips S1385 cable) to connect to this port.
6. Audio In (specified version only): Unbalanced, RCA style jack.
7. Audio Out (specified version only): Unbalanced, RCA style jack.
8. S-video In: Y/C video input with 4-pin mini-DIN style connector.
9. S-video Out: Y/C video output with 4-pin mini-DIN style connector.
10. Video In: Composite video input with BNC style connector.
11. Video Out: Composite video output with BNC style connector.
PHILIPS
PHILIPS
9
10
13
3
4
5
6
7
8
11
12
RS- 232
ACCESSORIES
AUDIO IN
1
5
1 ALARM IN
ETHERNET
2 ALARM OUT
10/100
6
9
3 RECORD START IN
4 ALARM RECORD RESET
12VDC
5 VEXT PULSE OUT
SCSI
6 ERROR OUT
7 GROUND
8 VIDEOLOSS OUT
9 DISK END OUT
AUDIO OUT
Ethernet
Figure 2A – Sample DVR1 System Installation
Figure 2B – DVR1 Rear Panel Connections
Audio
(Optional)
14
15
16
S-video IN
VIDEO IN
VIDEO OUT
S-video OUT
SCSI
Network
3
ACCESSORIES
1
5
1 ALARM IN
ETHERNET
2 ALARM OUT
3 RECORD START IN
10/100
6
9
4 ALARM RECORD RESET
5 VEXT PULSE OUT
12V DC
6 ERROR OUT
7 GROUND
8 VIDEOLOSS OUT
9 DISK END OUT
1
2
10
PHILIPS
Microphone
(Optional)
CD-writer
5
6
8
10
RS-232
AUDIO IN
S-video IN
VIDEO IN
SCSI
AUDIO OUT
VIDEO OUT
S-video OUT
9
11
4
7
Advertisement
Table of Contents
