Table of Contents
Advertisement
4. Installing your video recorder
Preparation for use
This chapter shows you how to start the video
recorder for use. The video recorder automatically
seeks out and stores all available TV channels.
'Aim' correctly
In the following sections, you require the remote
control for the first time. When using, always
aim the front of the remote control at the video
recorder and not at the TV.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
1
1
. Press
.
.
PROG P+
The automatic channel search starts.
PLEASE WAIT
START
The video recorder does not find any TV
channels during the search
* Select channel 1 on the TV. Can you see the
saved TV channel on the TV?
If not, check the cable connection of the aerial
(aerial socket), video recorder, TV.
* The video recorder searches the entire fre-
quency range in order to find and save the
largest possible number of TV channels. It is pos-
sible that the TV channels in your country are
broadcast in a higher frequency range. As soon
as this range is reached during the search, the
video recorder will find the TV channels.
2.'TIME' and 'DATE' will appear on the TV
2.
screen.
TIME --:--
DATE --/--/--
END=EXIT
3.Check 'TIME'. If required, please change the
3.
4.Check if the displayed settings for 'DAY',
4.
5.When all information is correct, save by
5.
The preparation for use is now complete.
Manual TV channel search
In some cases it can occur that all of the TV
channels are not found and saved during the first
installation. In this case, the missing or coded TV
channels must be searched for and stored man-
ually.
1.Switch on the TV set. If required, select the
1.
2.Press
2.
3.Use
3.
4.Use
4.
5.Select 'PROG.' with
5.
FINISH
6.With
6.
What is a special channel?
TV channels are transmitted in certain pre-
defined frequency ranges. These ranges are
divided into channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
7.Select 'CHANNEL' with
7.
If you set ' SKIP ' on for a channel, this channel
will be ignored when going through the channels
with
6
time with the number buttons
'MONTH' and 'YEAR' are correct.
pressing
STATUS/EXIT
programme number for the video recorder.
.
MENU
The main menu will appear.
or
PLAY B-K
STOP C-L
SET UP'. Then press
or
PLAY B-K
to select 'MANUAL TUNING'. Then
STOP C-L
press
.
FWD 1- B
Then press
FWD 1- B
MANUAL TUNING
PROG.
CHANNEL
SKIP
SELECT K L CHOOSE B
END=EXIT
or
PLAY B-K
STOP C-L
desired programme number that you want to
use for the TV channel, e.g. 'P01'. Then press
.
FWD 1- B
and confirm with
FWD
desired channel with
PROG P +
or
PROG P–
.
0..9
.
to select 'TUNER
.
FWD 1- B
or
PLAY B-K
STOP C-L
.
.
P55
055
[OFF]
, select the
or
0..9
or
PLAY B-K
STOP C-L
. Then enter the
1- B
0..9
.
.
,
EN
Hide quick links:
Advertisement
Table of Contents
