Table of Contents
Advertisement
• Write Once: When the archive device is full, archiving stops. Archiving will resume after the user acknowledges
that the archive device is full and that archiving should resume.
• No Overwrite: When the archive device is full, archiving stops. Archiving will resume only after a user enters the
advanced menu, manually erases the media, and resumes archiving.
• Continuous: When the archive device is full, archiving will continue, writing over the oldest video first.
Main Menu ➝ Archive Setup ➝ Erase Archive Medium
The Erase Archive Medium feature is used to erase the archive media.
ERASING MEDIA . . .
[CANCEL]
To erase the archived data, press ENTER. The Erasing Media progress bar appears. Press ENTER to cancel.
When the unit is finished erasing the pointers to the data, the message box at right appears. Press ENTER to
acknowledge the message.
4.8
Accessing the Advanced Menu
For information on accessing the Advanced Programming menu, please refer to
Section 5 in this manual. Note that the Advanced Menu is password protected.
4.9
About DSR
Main Menu ➝ About DSR
This screen allows the user to view important device information at a single glance.
NOTE: Before starting the erasing process, the DVR1 must be set to Selective
Archive, and Background Archive must be set to OFF.
SERIAL NUMBER:
V2E1-F92-290001
SOFTWARE VERSION:
2.00
SOFTWARE DATE:
SEP 17 2002 15:20:06
SOFTWARE CHECKSUM:
1BB200CE
BOOT CODE VER. :
1.01
DISK SIZE:
327.86 GB
ETHERNET ENABLE:
DISABLED
ETHERNET ADDRESS:
3.18.173.10
HARDWARE ADDRESS:
00-B0-19-FF-03-AE
19
ARCHIVE MEDIUM ERASED
[OK]
MESSAGE
[OK]
Advertisement
Table of Contents
