Specification - Mira Mode Instructions Manual

Important Points:
1. The installation, commissioning and maintenance of this product must be carried
out in accordance with instructions given in this Manual, and must be conducted
by designated, qualified and competent personnel.
2. The plumbing installation must comply with the requirements of UK Water
Regulations/Bye-laws (Scotland), Building Regulations or any particular
regulations and practices, specified by the local water company or water
undertakers. The installation should be carried out by a plumber or contractor
who is registered, or is a member of, an association such as:
- Institute of Plumbing (IOP), throughout the UK.
- National Association of Plumbing, Heating and Mechanical Services
Contractors (NAPH & MSC), England and Wales.
- Scottish and Northern Ireland Plumbing Employers' Federation (SNIPEF),
Scotland and Northern Ireland.
3. Mira products are precision-engineered and should give continued superior and
safe performance, provided:-
- they are installed, commissioned, operated and maintained in accordance with
these recommendations and
- periodic attention is given as necessary to maintain the product in good functional
order. Recommended guidelines are given in the MAINTENANCE.
4. Warning: continued use of this product in conditions outside the limits listed in
this section can severely affect the performance and reduce the effective service
life, and can present potential risk to users.
5. Suitable for use with most modulating Instantaneous Gas Water Heaters.
For information on other specific applications or suitability, refer to Kohler Mira
Ltd., or Local Agent.

SPECIFICATION

9