Table of Contents
Advertisement
Minimum maintained pressure:
With low capacity spray unit fitted (as supplied): 5 kPa (0.05 bar).
With high capacity spray unit fitted: 10 kPa (0.1 bar).
Maximum maintained pressure: 500 kPa (5.0 bar).
Connections: ½" BSP Male
Warning! Exceeding the stated maximum maintained pressure could result in
excessive spray force and possible damage to the handset.
½" BSP Male
Installation
1.
Unscrew the existing handset from
the flexible shower hose.
Note! The hose and handset may
have water in them.
2.
Screw the handset into the flexible
shower hose. If there is a hose
washer, be careful to retain it.
Caution! Do not overtighten.
Specification
Dimensions
169
All dimensions are nominal and in millimetres
Installation
199
40°
3
Advertisement
Table of Contents
