Installation Requirements - Mira Mode Instructions Manual

The performance specification outlined below is achieved with outlet blend
temperature set between 35 - 45°C and supplies of 15°C cold and 65°C hot with
nominally equal pressures.
- Outlet blend temperature is maintained within 2°C with a
10°C change in hot or cold supply.
- Thermostatic shut down to seepage within 2 seconds if cold supply
fails. This is achieved only if the hot supply temperature is 10°C above
the set outlet blend temperature.
Plumbing Connections
Inlet connectors are 15 mm compression
Outlet connector is 15 mm compression
Hot (H) and Cold (C) inlets are clearly marked and must be connected this way.

INSTALLATION REQUIREMENTS

Key to Symbols
Isolating valve
Mixing Valve
Overflow Indicator
Pressure Reducing Valve
Twin Impeller Pump
Single Impeller Pump
Tempering Valve
Mini Expansion Vessel
11