PDFMAILER.DE
K-BOARD
TO REMOVE:
1. 1.Remove the front cover (See page 11).
2. Disconnect the F-board connector.
3. Remove the 7 setscrews (A) and remove the printed circuit K-board.
TO ATTACH:
1. To attach the board "K", follow the above procedure in reverse.
Note
Ensure to insert the projection of the slide volume into the forked slide knob.
F-BOARD
TO REMOVE:
1. Remove the front cover (See page 11).
2. Pull out the connector from the K-board.
3. Remove the 2 setscrews (B) and remove the isolated paper and the F-board.
TO ATTACH:
1. To install the F-board, follow the above procedure in reverse.
K-BOARD AND F-BOARD
28