A-Board And Fuse - ELNA 6001 Service Manual

PDFMAILER.DE
REPLACING THE FUSE
TO REMOVE:
1. Remove the front cover (See page 11).
2. Remove the four setscrews and lift off the cover on A-board.
3. Remove the fuse (Pry it out with a screwdriver).
TO INSTALL:
4. Follow the above procedure in reverse.
TO INSTALL:
1. Follow the above procedure in reverse.
FUSE NO. PARTS NO.
F1, F3
F2
Note:
1. Replace the A-board if you notice any browning, discoloration, or other abnormalities.
2. Only install fuses with the correct rating.
3. If the fuse is loose, bend the fuse clips inward to secure the fuse.

A-BOARD AND FUSE

395739-61
395739-62
25
TYPE
TSD – 2.5A 250 Volts
5.2 • x 20mm TIME-LAG FUSE
TSD – 3.15A 250 Volts
5.2 • x 20mm TIME-LAG FUSE