TRANSMISSION
TRANSMISSION
TRANSMISSION DISASSEMBLY CONT'D
3. Remove the e--clip and then remove the
transmission switch.
Transmission
Switch
4. Remove the five bolts that secure the cover.
Remove the detent spring.
Spring
5. Mark the detent gear with a white pen. Remove the
detent gear from the case.
NOTE: It may be helpful to place a mark just above
the keyed spline.
8.6
6. Mark the shift lockout disc, this will indicate which
sideof the disc faces outward during assembly.
Remove the shift lockout disc.
NOTE: It may be helpful to place a mark just above
the keyed spline.
7. Remove the shift shaft and detent lever.
8. Note the timing marks on the shift gears. Remove
the shift gears from the case.