Rear Gearcase Assembly - Polaris SPORTSMAN 600 2003 Service Manual

FINAL DRIVE FINAL DRIVE
7. Inspect the ring gear for abnormal wear, broken,
or chipped teeth. Spin the bearing to check the
ball bearings for smoothness.
bearing if needed.
7.26
REAR GEARCASE
REASSEMBLY
1. Inspect the pinion shaft bushing for wear.
Replace the
2. Replace
components.
3. Install the pinion shaft into the gearcase housing.
Install the pinion shaft cover and torque the cover
bolts to 25 ft. lbs. (34 Nm).
all O--rings, seals, and worn