System Options 3; Consumer Options 1 - Bosch Solution 3000 Quick Reference Manual

42 en | Programming Parameters
4.15.3

System Options 3

Item
System Options 3
4.15.4 System Options 4
Item
System Options 4
4.15.5

Consumer Options 1

Item
Consumer Options 1
4.15.6 Consumer Options 2
Item
Consumer Options 2
4.15.7 Consumer Options 3
Item
Consumer Options 3
2015.06 | 03 | F.01U.298.027
Location Option
0494 1 = AC fail after 1 hr. (Disabled = after 2 min.)
2 = Ignore AC fail
4 = Pulse count handover allowed
8 = Handover delay to be sequential
Location Option
0495 1 = Panel to power up disarmed (if power
reset)
2 = Arm/disarm tracking on power up
4 = Reserved
8 = Reserved
Location Option
0496 1 = Test reports only when armed
2 = Test report after siren reset
4 = Auto arm in STAY Mode 1
8 = STAY indicator to display day alarm status
Location Option
0497 1 = Codepad displays extinguish after 60 sec.
2 = Single button arming allowed (AWAY/STAY
Modes 1 and 2)
4 = Single button disarming allowed (STAY
Modes 1 and 2)
8 = Alarm memory reset on disarm
Location Option
0498 1 = Codepad fault beeps allowed
2 = Use digit 3 for codepad duress alarm
(instead of digit 9)
4 = Alarms activate sirens and strobe outputs
in STAY Modes 1 and 2
8 = Zone tamper alarms to be silent
Quick Reference Guide
Control Panel
Default New
8
Default New
2
Default New
0
Default New
2
Default New
5
Bosch Security Systems, Inc.