Time Programming; Entry Time 1; Exit Time (Away/Stay Modes); Entry Guard Time For Stay Mode - Bosch Solution 3000 Quick Reference Manual

Control Panel
*Pulsing Mode
When you program the output polarity as pulsing, the time base becomes the ON time and the
multiplier becomes the OFF time. The OFF time is the time base x the multiplier. (For
example, if you want the output to pulse 1 sec. ON and 5 sec. OFF, you would program time
base as 2 and the multiplier as 05.)
Notice!
When event code Remote control 1 – 20 is selected, polarity mode shall be programmed as
time-independent option (including 1 = Normally open, going low, or 7, or 8, and 14).
4.14

Time Programming

4.14.1

Entry Time 1

Item
Increments of 1 sec. (0 to 15 sec.)
Increments of 16 sec. (0 to 240 sec.)
4.14.2 Entry Time 2
Item
Increments of 1 sec. (0 to 15 sec.)
Increments of 16 sec. (0 to 240 sec.)
4.14.3

Exit Time (AWAY/STAY Modes)

Item
Increments of 1 sec. (0 to 15 sec.)
Increments of 16 sec. (0 to 240 sec.)
4.14.4

Entry Guard Time For STAY Mode

Item
Increments of 1 sec. (0 to 15 sec.)
Increments of 1 6sec. (0 to 240 sec.)
4.14.5

Delay Alarm Report Time

Item
Increments of 1 sec. (0 to 15 sec.)
Increments of 16 sec. (0 to 240 sec.)
Bosch Security Systems, Inc.
Location Option
0466
0467
Location Option
0468
0469
Location Option
0470
0471
Location Option
0472
0473
Location Option
0474
0475
Quick Reference Guide
Programming Parameters | en
Default New
4
1
Default New
8
2
Default New
12
3
Default New
0
0
Default New
0
0
2015.06 | 03 | F.01U.298.027
39