Organization; Related Documentation; Hardware Documents - Cisco ASR 14000 Series Hardware Installation Manual

Organization

This document contains the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7

Related Documentation

For complete planning, installation, and configuration information, see the documents in this section for
your chassis type (8-slot or 4-slot).

Hardware Documents

•
•
•
•
•
•
Cisco ASR 14000 Series Router PLIM, SIP, and SPA Hardware Installation Guide
viii
Title
PLIM, SIP, and SPA Product
Overview
Overview:
Cisco ASR 14000 Series Router
Physical Layer Interface Module and
SPA Interface Processor
Overview:
Cisco ASR 14000 Series Router
Shared Port Adapters
Preparing to Install a PLIM, SIP, and
SPA
Installing and Removing a PLIM or a
SIP
Installing and Removing a SPA
Troubleshooting the Installation
Cisco ASR 14000 Series Router 4-Slot Line Card Chassis Site Planning Guide
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Site Planning Guide
Cisco ASR 14000 Series Router 4-Slot Line Card Chassis System Description
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis System Description
Cisco ASR 14000 Series Router 4-Slot Line Card Chassis Installation Guide
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Installation Guide
Description
Provides a brief introduction to the physical layer
interface modules (PLIMs), SPA interface
processors (SIPs), and shared port adapters
(SPAs).
Provides a SIP and SPA compatibility summary.
For each supported SIP and PLIM, it provides an
overview and a summary of characteristics.
For each supported SPA, provides a summary of
SPA characteristics and a SPA overview.
Describes the required tools, equipment, and
safety guidelines for installing PLIM, SIP, and
SPA.
Describes the procedures for installing and
removing a PLIM or a SIP on the
Cisco ASR 14000 Series Router.
Describes the procedures for installing and
removing a SPA on the
Cisco ASR 14000 Series Router. It also describes
how to verify the SIP and SPA installation.
Provides information for troubleshooting the
installation of SIPs and SPAs. It also describes
helpful debug commands and error messages.
Preface
OL-17456-01