Alcatel-Lucent 7210 SAS M Service Manual page 856

Show, Clear, Debug Commands
cem
Syntax cem
Context clear>service>statistics>id
Clears the statistics associated with the cpipe service.
Description
sdp
Note : SDP commands are not supported by 7210 SAS-M devices configured in Access uplink mode.
Syntax sdp sdp-id keep-alive
Context clear>service>statistics
This command clears keepalive statistics associated with the SDP ID.
Description
sdp-id — The SDP ID for which to clear keepalive statistics.
Parameters
counters
Syntax counters
Context clear>service>statistics>id
This command clears all traffic queue counters associated with the service ID.
Description
spoke-sdp
Syntax spoke-sdp sdp-id[:vc-id] {all | counters | stp}
Context clear>service>statistics>id
This command clears statistics for the spoke SDP bound to the service.
Description
sdp-id — The spoke SDP ID for which to clear statistics.
Parameters
vc-id — The virtual circuit ID on the SDP ID to be reset.
all — Clears all queue statistics and STP statistics associated with the SDP.
counters — Clears all queue statistics associated with the SDP.
stp — Clears all STP statistics associated with the SDP.
Page 856
1 — 17407
Values
1 — 17407
Values
1 — 4294967295
Values
7210 SAS M Services Guide