Wan Ip Addressing - ActionTec V1000H User Manual

WAN IP Addressing

The WAN IP Address screen allows you to manually set up the WAN IP address of
the Gateway. To do this:
1. Click WAN IP Address from the menu on the left side of any Advanced
Configuration screen. The WAN IP Address screen appears.
2. Select the type of connection the ISP uses.
Note: Some DSL providers use PPPoE to establish communica-
tion with an end user. Other types of broadband Internet con-
nections (such as fixed point wireless) may use either DHCP or
static IP address. If unsure which connection is present, check
with SaskTel before continuing.
3. If using PPPoA or PPPoE was selected in step 1, enter the user name and pass-
word in the appropriate text boxes. If the ISP requires no user name or pass-
word, click in the "My ISP does not require a username and password"
check box.
Actiontec V1000H Gateway
36