ActionTec V1000H User Manual page 23

To set up wireless MAC authentication:
1. Select the SSID from the SSID drop-down menu.
2. Turn on the MAC authentication by clicking in the Enable radio button next to
MAC Authentication.
3. To allow or delete certain devices from the Gateway's wireless network, click in
the appropriate radio button (Allow device list or Deny device list). Once you
choose Allow/Deny, the state of the device list is frozen; that is, if you choose
Allow, you can only allow devices through MAC authentication to join the
Gateway's wireless network. All other devices not specifically listed will not be
allowed on the network. Conversely, if you choose Deny, only those devices
specifically listed will be denied access to the network; all other devices will
be allowed.
4. Enter the device's MAC address by either selecting it from the Select MAC
Address drop-down list, or manually entering it in the Manually Add MAC
Address text box.
Apply to save your changes.
5. Click
6. Repeat steps 1-5 to add more devices.
Actiontec V1000H Gateway
20